On MovieTome: Corey Haim freaks out on LOST BOYS 2
4 Resources for

vlan1

  • Subscribe to this listing via:
  • RSS
  • Email

TechRepublic Resources

Windows DHCP Server and VLAN
I have a CISCO catalyst 6500 and I'm using Windows Server 2000 SP4. What I want is per floor I'll assign diffrent VLAN but seems like we are having problem at the start of the implementation. The DHCP server is in VLAN1 while the client is on VLAN 20The client...
Tags: NETWORKING, LANs, whang_wesley@..., Microsoft Windows, server, DHCP, VLAN, VLAN1, DHCP Server
Discussion threads 2007-11-21
VLAN Routing to Internet through firewall
HelloWe have installed fiber interconnects to all of our branch stores. The interconnect supplier uses different VLANs to give us point to point connections. I have a DLink L3 switch at the main location to accept the VLANs and route the subnets together. The devices on the VLANs can talk...
Tags: LANs, firewall, geary@..., VLAN, VLAN1, Internet
Discussion threads 2007-10-29
Cisco 871w and inter-vlan routing
I have 3 vlans; vlan1(bvi10)fa0-1, vlan2(bvi20)fa2, and vlan3(bvi30)fa3. vlan1 has web server and should be accessed by 2 & 3. I have dsldhcp on dialer1, nat, and ddns for webserver and ssh. I'm not sure about where to trunk from and do I configure subinterfaces on dialer1?
Tags: Web servers, LANs, tazz20019@..., Cisco Systems Inc.
Discussion threads 2007-08-24
How do you share ports in VLAN?
I'm kinda new in the VLAN arena. I would like to setup the simplest VLAN- 2 totally separate VLANS that share 3 servers between them. I have the PowerConnect 2724 switches which are layer 2 switches. They support VLANS and Tagged frames. I can create VLAN2...
Tags: VLAN, VLANS, share, switch, ports, TechTony, networking, server
Discussion threads 2006-09-06

Additional Resources

CISCO 851W Config Wireless
How do I configure the CISCO 851W Wireless Interface to use the Vlan1 Interface IP Addresses?I need for all of the IP Address to be in the same scheme yet it will not let me assign the radio interface an IP adress in the Vlan1 scheme.
Tags: Network technology, NETWORKING, john@..., wireless, Cisco 851W, IP, Cisco Systems Inc.
Discussion threads 2007-03-29
single dhcp over multiple vlan on a single switch
Hi, I am a newbie to vlan, i have problem to connect my multiple vlan to the internet and also assigning ip address for my vlan, i have set up 2 vlan on a single switch, i hav a router which has dhcp enable and connecting to the internet. I...
Tags: LANs, Routers & switches, Network technology, NETWORKING, bohseng@..., VLAN, router, DHCP, IP address, IP
Discussion threads 2007-03-23
Windows Secondary IP only works with IP within same VLAN?
Hello....As subject. Inside "Advance TCP/IP settings" of Windows, we can add additional IP addresses and gateway. Will it work if the IP is in a different vlan. (i.e. Primary IP 10.1.1.10/24 VLAN1 and Secondary IP 10.1.10.99/24)I don't want to upgrade the Intel NIC driver and use the NIC...
Tags: LANs, Network technology, NETWORKING, Domain names, targotargo@..., Microsoft Windows, IP, VLAN
Discussion threads 2007-07-16
3com 4250t switch, 2 vlans, one server need to be seen from both vlans.
Hi all,I have situation in which i need help.I have customer which want to divide his lan to two vlans.The vlan_trainees and vlan_office. Company has two 3com switches - 4250T(3C17302).Office vlan has 17 PCsTrainee’s vlan has all others which are - 78 PCsAnd one server which is a gateway to...
Tags: LANs, linas@..., 3Com Corp., VLAN, Switch No1, server
Discussion threads 2007-03-20
Cant change Ip address of Cisco 2950 Switch
Dear can any body tell me the Problemi had start SwitchSwitch>Switch>EnableSwitch# Config tEnter configuration commands, one per line. End with CNTL/Z.Switchconfig#switchconfig#interface fastEthernet 0/1switch(config-if)#switch(config-if)#ip ?Interface IP configuration subcommands: access-group Specify access control for packets dhcp DHCP igmp...
Tags: NETWORKING, Cisco Systems Inc., fayaz@..., IP address, IP
Discussion threads 2007-05-08
VLAN catalyst 2950
Hi all,im trying to configure vlan on my switch, port f0/1 is set as trunk, connected to cisco router. on my switch, port f0/2 & f0/3 belong to vlan2, and f0/4 & f0/5 on vlan3, all the others are vlan1 default. servers on port 2 & 3 see each other,...
Tags: router, elmer.rivera@..., it management, trunk, IP, VLAN
Q&A 2006-04-11
DHCP + VLAN + Accesslist
Techies,I need your help in setting up the below configurationI have a HP Procurve 3400cl switch. I need to configure 4 vlans.VLAN1 - will have the DHCP server connectedVLAN 2 3 4 - all system connected to these vlans should get IP's from the DHCP server but should not communicate.Please...
Tags: LANs, NETWORKING, mallik_hs@..., VLAN, DHCP
Discussion threads 2007-04-20
vLANs on Cisco 3845 with etherswitch
I am trying to config vLANs on a 3845 Cisco router. I have a 48 port switch service module in port B. I can set the vLANs up on the switch but can not figure out how to truck the vlans to the router using the internal gigabit...
Tags: Cisco Systems Inc., jmg@..., networking, router, swITch, VLAN, VLANS
Q&A 2006-07-31
Lock to a DHCP Server
I need some help in locking a workstation to a specific DHCP server througgh a registry hack or any software.A subnet should only be allowed to a specific DHCP by settings on the Router to allow DHCP traffic over port 67/68. Two DHCPs should NOT server the same subnet. Looks...
Tags: DHCP, DHCP Server, network, noelamo@..., server, windows
Q&A 2004-12-21
How do i create cisco VPN client username and password
I have created a VPN tunnel with two Vlans (1 & 2). VLAN2 access being for the third party to remotely connect and manage their servers. They do not have access to VLAN1 and vice versa. I have also created a logon script using cisco VPN client software. How do...
Tags: VPNs, Network security, TELECOMMUNICATIONS, NETWORKING, renike@..., VPN, cisco vpn, password, Cisco Systems Inc.
Discussion threads 2007-08-15
Unable to access ISA server from new WAPS
The setup is 3 buildings, Build A&B wireless on VLAN1 can access ISA proxy for outside internet. New Build C with new WAPS are on the same VLAN as A&B. Laptop can get Ip address and access internal network but can't ping or access ISA server. Setup...
Tags: Wi-Fi, Network technology, kskyit@..., ISA, Microsoft ISA Server, server
Discussion threads 2007-09-07
ASA 5505 configuration SOS!!!!
Geeks,I am new with Cisco. Recently,I purchased a base-lisenced ASA 5505 and attempted to configure SSL VPN. This project created 2 internal interfaces on ASA, denoted as inside and DMZ, which are allowed to access internet.The outside interface was connected to a Internet router Netgear DG632 configured as "half...
Tags: NETWORKING, Home networking, INTERNET, Network technology, anita_kuang@..., ASA, DMZ, IP, IP address, NetGear
Discussion threads 2007-10-08
Active Directory with Vlan setup wrong?
Hi, I have successfully configured my GSM7224 Switch and Cisco2620 router to use 6 Vlans, with dot1q encapsulation configured on the routers sub-interfaces, and a W2K server handling DHCP and DNS, I can ping fine, all seems to work ok, but my client PC's name, IP does not show up...
Tags: LANs, Network technology, NETWORKING, Microsoft Windows Active Directory, Acer1986, VLAN, IP, vlan participation
Discussion threads 2007-11-15
Cisco 871W - VLAN Int won't come up
Hi,I have configured configued our company's Cisco 871W per suggested configs, found here and on the cisco web site, however, VLAN1, VLAN10 and VLAN20 interfaces won't come up (e.g. up/down) and it's preventing communication. Guess I'm expecting this to behave like at layer-2 layer 3 swt/rtr (i.e. 3560). Can...
Tags: Network technology, NETWORKING, LANs, Cisco Systems Inc., crondthaler@..., IP, VLAN
Discussion threads 2007-11-03
Cisco 857 and Cisco 5505 ASA in series
HiI have now been working on Cisco equipement for a grand total of about 2 weeks. Hence I don't really know what I'm doing.I want to make my Cisco 857 Router transparent, so that the Cisco 550 firewall has the external IP address, given to me from my ADSL connection.My...
Tags: NETWORKING, Network technology, jking_007@..., IP, PPP, Cisco Systems Inc.
Discussion threads 2007-10-19
configuring vlans
I have 2 dell switches 6200's. My goal is to generate as much traffic between the switches i.e on the trunk ports. I have a traffic generator that generates/ssimulates http client/server traffic. I have configured clients on one switch and servers http on the second one. Should I create vlans...
Tags: linux, networking, programming, server, syedk01@..., VLAN
Discussion threads 2007-03-06
  • << Previous
  • page 1 of 1
  • Next >>


IT Hiring Kit: IT Manager
The IT Hiring Kit for IT Managers will help you interview, evaluate, and select suitable candidates for a new IT Manager position. This kit comes with ...
Buy Now
Cisco IOS Command Chart (IOS v.12+)
Becoming proficient with Cisco equipment means remembering a whole new set of commands. These command charts give you a quick way to look up the needed IOS commands and switches when you need them.
Buy Now

The Green Enterprise