Sponsored White Papers, Webcasts, and Downloads
Additional Resources
- My DVD Drive Slows down my Computer When It's Connected as Primary Master
- Hello guys, i have a problem with my pc that started about a week ago, whenever i tried to access my dvds/cds or burn new copies my entire system slows down to a crawl. Initially, my dvd drive is connected as master device on the primary IDE channel, the second...
- Tags: Serial ATA, joneski25@..., Connected Corp., computer, DVD-drive
- Discussion threads 2007-08-20
- Secondary IDE connector fails
- ASRock P4V88, Win XP Pro SP2 IDE secondary connector does not recognize my DVD drive anymore.... or any other drive. Already done:-Changed IDE cable-Checked the BIOS-DVD drive jumper ok on Master (only drive connected.-Uninstalled/reinstalled IDE driver in XP Hardware manager-Tried IDE 2 with other drives, DVD and Hard drives. Fyi...
- Tags: BIOS, BluesCat, DVD-drive, IDE
- Q&A 2005-04-28
- Conflict on Ports (IRQ)
- I installed win xp at a new Am2 system with MSI K9neo-f And after i Install the drivers of Motherboard it says in the device manager that the secondary IDE channel(K9neo-F has Only one IDE Channel) and the Networking adapterThe one that is in the Motherboard has a conflict on...
- Tags: adapter, hardware, IDE, IDE Channel, IDE-channel, IRQ 14, tsoumelli@...
- Discussion threads 2006-10-18
- How do I connect a 3rd eide drive to my pc.
- I have a new hard drive to replace my old. I need to ghost the old 10g hardrive, but to do this I need to temporarily connect the new drive a third to my motherboard? How do I do this? I cannot find any eide cables...
- Tags: BIOS, Development tools, gmcroskey1@..., IDE, IDE-channels, slave, ghost, PC
- Discussion threads 2007-04-20
- HardDrive Not Detected or Don't Power On
- My hard drive won't turn on when I put in Both the Power Cord & the IDE Cable into my hard drive. But if I take out the IDE Cable & leave the power cord in, then the hard drive turns on. What can I do to make...
- Tags: cable, hard drive, hardware, IDE, IDE cable, skullkrusher250@...
- Q&A 2005-03-09
- DVDRom not recognised in bios
- Hi forgive me I am new at this. Its a long story but the outcome is that my bios does not recognise one of my dvdromasus quiettrack on the secondary ide circuit, that is the slave drive on that circuit(original problem was power supply packed up/changed case with new power...
- Tags: BIOS, DVD, DVDROM, hard drive, hardware, IDE, jumper, mtrooney@...
- Discussion threads 2007-01-07
- HDD Not detecting
- Dear Techies,I have a MSI motherboard with AMD processor. Whenever I am connecting a working drive to the Primary Master or Slave IDE port it is not detecting and some mechanical sound comes from the HDD, but whenever I am connecting to Secondary Master it solves the problem. Here I...
- Tags: hard drive, CDD, anantanarayanb@..., IDE
- Q&A 2006-06-27
- CD drive problems
- Hi,I use LG cd writer and LG cd rom drives on the same PC. Since the cd-rom drive is not working anymore, i decided to unplug it from the system. However, after unplugging it, the system only shows 128mb RAM while I use 256mb (2 x 128mb). Is there a...
- Tags: CD, CD-ROM, highnezz@..., IDE, ide channel
- Q&A 2005-03-04
- IDE Cable Problem
- My hard drive won't power on if I plug the IDE cable into the cd drive. I can run the computer without any cd drive, but I need to use the cd drive. I tried using a different IDE cable, but it still won't work.I generally use separate...
- Tags: cable, CD, CD Drive, hard drive, hardware, IDE, IDE cable, skullkrusher250@...
- Q&A 2005-03-17
- windows xp ide drive found as scsi
- I have 2 ide drives 60gb IBM and 80gb Maxtor both are found by the bios but winxp lists them as scsi with 0mb volume and no drive letter assigned?Firstly we will need a bit more infoLike what type of M'Board, if they are on a secondary IDE channel or...
- Tags: ehuhn@..., IDE, Microsoft Windows XP, SCSI, windows
- Discussion threads 2004-10-17
- reboot loop
- Hi again!After solving the last problem (PC won't start), I still got one...Now the computer goes through POST then a black screen and restarts.I checked BIOS and it detects CPU, memory and hard disks correctly but not the DVD.I try to boot without the DVD connected and still the same.I...
- Tags: reBOOT, IDE, BIOS, MB, G..., DVD, hard drive
- Q&A 2006-05-25
- BIOS doesn't recognize the CD/DVD Player
- Hello.New Mainboard: ASUS P5LD2 PCX i945PI have 2 CD/DVD Players, the problem is, the BIOS AMI doesn't recognize them.So I can't install any drivers. Maybe there is wrong with the cable and jumpers (PRI_EIDE, SEC_EIDE, Jumpers)How is the right way?Thanks for any helps!GreetsCheck1. IDE cable – make sure the cable is...
- Tags: BIOS, cable, CD, DVD, DVD player, hardware, IDE, IDE Lead, peg_so@...
- Q&A 2005-09-08
- New Build: setting up SATA drive and optical drives
- I just got a new ASUS motherboard and am building a new system. I have only 1 SATA WD hard drive, no IDE hard drives, and two optical drives. My question is :Do I set up the optical drives on the primary or secondary IDE connector on the motherboard. My...
- Tags: hardware, IDE, markeyp@..., optical drive, RAID, raid configuration, sata, SATA Drivers, Serial ATA
- Discussion threads 2007-01-27
- New DVDRom on HP Pavilion ZT1155 not recognised by BIOS
- Hi !I have had to replace my CD/DVD Combo drive on my HP Pavilion ZT1155 as the old drive was spoilt. I bought a new DVDRW drive TEAC DV-W24EW which I have installed in its place. The drive is recognised by windows and works fine in windows. The drive is...
- Tags: Desktops, pickofindia@..., BIOS, HP Pavilion ZT1155, Secondary Master, Cd/DVd, drive-I, HP Pavilion, Hewlett-Packard Co.
- Discussion threads 2007-05-03
- Problum with CD combo Drive
- Im not really sure this is the problum, but like they say you have to start some where.I have a HL-DT-ST RW/DVD GCC-4120B/ Hitachi-LG CD-Rom one WD HDD-13 gig, WD HDD 80 gig, KVR 512 pc3200 400mhz mem stick, MSI KM266-8235 Mother board KM2M Combo ms-6738, cpu-Athlon XP1800+, using on...
- Tags: IDE, thetracker1099@..., windows, gig, CD
- Q&A 2006-04-11
- Enterprise open source VoIP with Asterisk
- Channel BanksDon't forget to mention that Adtran TA750 channel banks can be had ont he secondary market in new condition for a fraction of their original cost.Great pointeBay does have some very cheap deals on channel banks. Thanks for your comments, they're very useful with the model number provided!
- Tags: Asterisk, Enterprise open source VoIP, channel bank, voip, Enterprise, bank, david@..., Topology, networking
- Discussion threads 2006-07-04
- Regarding Connecting Of Two Harddisk
- Hi,I am having one problem.I have two Harddisk and two cdrom.I connected but it's showing me one harddisk and two cdroms.I connected my primary harddisk to IDE1 and one cdrom with it.With IDE2 I connected second harddisk it but when i connect my second cdrom it does not boot.So can...
- Tags: ask_anurag@..., BIOS, cable, CD-ROM, hard drive
- Q&A 2004-12-26
- BOOT from Internal EIDE HD on Secondary IDE Master w/Existing SATA OS HD?
- I'm doing an upgrade involving a Core2 Duo on a new MSI 945P Neo3 mobo that features 4 SATA ports & just one EIDE port. New 320GB Hitachi HD connected on SATA 1, which is replacing as the boot drive the legacy 80GB Maxtor EIDE HD, both drives under...
- Tags: ericpeterson@..., Serial ATA, windows, hardware, IDE, EIDE HD, SATA 1, SATA 2
- Discussion threads 2007-02-02
- Installing a secondary hard disk
- I am trying to install a secondary hard drive on a HP D530 that currently has a Western Digital Hard Drive (WD800LB). I have been given a Seagate Ultra 320 to install but it is a 80-pin connection and the Western Digital is a 40-pin. What is the best configuration...
- Tags: Development tools, Shaun.31, SCSI, IDE, hard drive
- Discussion threads 2007-09-06
- << Previous
- page 1 of 1
- Next >>
