Sponsored White Papers, Webcasts, and Downloads
Additional Resources
- DHCP : IP Conflict problem on Windows98
- Recently I started get IP conflict error messages.That happens only on Windows98 and never on XP stations. When I run winipcfg I see the normal Address but wrong mask sometimes it's 255.255.255.255 sometimes 255.0.0.0. In reality we have 255.255.252.0. Release-Renew always solves the problem. There is no other DHCP on...
- Tags: alexr@..., DHCP, IP, IP CONFLICT, networking, windows, Windows98
- Discussion threads 2005-08-10
- school wireless problem (2003 server
- We are trying to setup a new wireless network within our school. We have installed a DLINK 2000AP+ onto our school network (Win 2003K) and configured it ok. However we cant get any of the laptops to connect to the server via the Access Point.The laptops are set to obtain...
- Tags: Network technology, Wi-Fi, tech@..., IP address, IP, wireless, server
- Discussion threads 2007-04-30
- VPN Connected but cant see server
- I have a client connected to our VPN, they used the same standard VPN settings that I have provided to all of our other users. They can ping the server using the IP address but for some reason when they attempt to connect through Windows Explorer it says it gives...
- Tags: VPNs, Network security, NETWORKING, TELECOMMUNICATIONS, SECURITY, Network technology, kurt.foster@..., Connected Corp., VPN, subnet mask, server
- Discussion threads 2007-06-21
- Setting up a point to point network
- OK I am a little new at this so bare with me. I should also say that cisco routing is really not my bag, this project was just thrown in my lap. I have a dedicated t1 line between my main office and data location. at the end...
- Tags: IP, IP address, jgard@..., network, networking, router
- Q&A 2005-02-24
- VPN setup
- I am wondering if somebody has been able to successfully install and configure a VPN site to site connection using Watchguard Firebox6tc VPN device behind a Cisco router doing NAT. If you have, please post a step by step guide.Thanks,You will have to tell the Cisco router to either (1)...
- Tags: IP, Manthax, VPN, windows
- Q&A 2005-07-05
- VLSMs?
- what are the efficient steps taken when calculating Variable Length Subnet Mask VLSM address from a subnet address?Given that,forexample: The subnet address is 172.16.32.0/20,what is it's expected VLSM address ?Thanx alot for your help.If you're splitting this one in 2 that'd be 172.16.32.0/19 and 172.16.48.0/19When you specify "/20", it...
- Tags: it management, musijosh@..., network, subnet, Variable Length Subnet Mask
- Q&A 2006-03-06
- VPN IP Address Pool
- I am trying to setup a VPN.If your internal network is 192.168.0.0/16 and the DHCP only handle IP from 192.168.0.1 to 192.168.0.255, what will you use for the VPN Address pool?Will you use 192.168.1.1 to 192.168.1.255 (mask 255.255.255.0) or 192.200.0.1 to 192.200.0.255 (mask 255.255.255.0)?
- Tags: VPNs, Network security, NETWORKING, TELECOMMUNICATIONS, SECURITY, Working IT, VPN
- Discussion threads 2007-10-05
- Cisco 3800 series DHCP, VLAN help
- Ok, below is how I have my DHCP setup and my VLAN setup. I tired to just do straight DHCP without a VLAN but I found out that my ethernet ports that I want to DHCP are all L2 (layer 2) and cannot be setup with an IP or DHCP....
- Tags: DHCP, jeremy.smith@..., programming, Cisco Systems Inc., IP, ip dhcp, VLAN
- Q&A 2006-05-31
- Network Configuration
- I was asked this question in class and I'm not sure if I gave the right answer or not.Company with 55 max different locations.Each location has a static IP address.Each location has max 13 PCs in the internal network.Locations need to be able to connect via VPN thus have the...
- Tags: NETWORKING, Network technology, Routers & switches, mail.longxin@..., network, network configuration, SN 255.255.255.128 Firewall
- Discussion threads 2007-06-15
- Network Configuration
- I was asked this question in class and I'm not sure if I gave the right answer or not.Company with 55 max different locations.Each location has a static IP address.Each location has max 13 PCs in the internal network.Locations need to be able to connect via VPN thus have the...
- Tags: NETWORKING, Network technology, Routers & switches, mail.longxin@..., network, network configuration, SN 255.255.255.128 Firewall
- Discussion threads 2007-06-16
- NGS Sniff
- NGS Sniff is showing that an outside IP (255.255.255.255) is pinging UDP 47474.Anyone know of any legitimate reason to be knocking on a door that far up the number chain?Sounds erronousI would bet it is a routing issue if you are using Cisco stuff. I would assume some routing...
- Tags: NETWORKING, Network technology
- Discussion threads 2005-07-27
- configure netcsreen 204
- HI,Am very new to netscreenI have a netscreen firewall in transpartent mode .I need to allow certain ips through the firewall.Want to know the config regarding that :suppose :set address "v1-dmz" "netscreen" 12.1.1.1 255.255.255.255 "firewaall"set address "V1-Trust" "s2" 10.1x.x.x 255.255.255.255 "swicth02"set policy id 45 name "switch access" from "V1-Trust" to...
- Tags: Firewalls, Network security, NETWORKING, rajashree.bhattacharya@..., firewall
- Discussion threads 2007-04-20
- Modifying Cisco access list
- I am trying to modify my cisco 2851 router configuration to allow ssl traffic to a particular server. There is an extended Access list in place and I am trying to edit it to add an entry similar to line 5 below. From the config prompt I am...
- Tags: TCP, jhenderson@..., networking, Cisco Systems Inc.
- Discussion threads 2006-12-04
- SUBNET
- I am a beginner in network field , i want to know the basics of subnetting, and how to subnetting fro different types of classes.Anybody can help me on this?You need to watch this on-line presentation for a beginner's overview of TCP/IP. It's free and if you pay attention, you...
- Tags: aseemmk@..., beginner, it management, mask, network, subnet
- Q&A 2005-02-27
- Public Ips without NAT and Firewall
- Hello,I've been requested to setup a network with no NAT and Firewall on a Cisco AS5300, that is the Public IP have to access the internet directly and should also be able to be pinged.I need help on how to configure the Router to do this. I appreciate the security...
- Tags: Network technology, NETWORKING, firewall, muhairwejas@..., IP, Network Address Translation
- Discussion threads 2007-08-14
- ethernet (network) and wireless (printer access) on the same machine
- Hello, I have a Vista machine connected to the local network via ethernet. I also need to allow it to connect wirelessly to a wireless print server. Is it possible to have 2 tcpip connection on a machine simultaneously? If so, how do I configure it?Thanks,MBConfigure for...
- Tags: Printers, LANs, Wireless LANs, Wi-Fi, mboyd@..., printer, wireless, wireless print server, Ethernet, network
- Discussion threads 2007-06-20
- Windows 2003
- A - I have Windows 2000 Server without AD but DHCP. This computer is using 200.201.1.??/ 255.255.255.0 series of ip address connected to a DSL modem using 200.201.1.250 ip address.B - I have installed Windows 2003 with AD using 10.30.1.?? / 255.255.255.0 addresses. Due to various reasons I want to...
- Tags: NETWORKING, Operating systems, Microsoft Windows 2000, Network technology, javaid7@..., Microsoft Windows 2003, Microsoft Windows, network
- Discussion threads 2007-08-07
- Windows vista File Sharing
- Hi! Im new to windows vista, I have 3 computers connected to a router then to a switch, my 3 computer can access the internet and the ip address of my pc uses dhcp that came from my router pc1 is 192.168.0.2 with subnet 255.255.255.0 and pc2 is 192.168.0.3 with...
- Tags: Microsoft Windows Vista (Longhorn), Routers & switches, Network technology, NETWORKING, file-sharing, Microsoft Windows, derflanoj@..., subnet, PC, Microsoft Windows Vista
- Discussion threads 2007-10-25
- Configuration of Router
- Hi all,I have configured three different servers with three different Classes. Letus assume ServerA ,B & C with below configarations.Server A:IP address 10.10.10.1Subnet mask 255.0.0.0Default gateway 10.10.10.10For serverB & C the IPaddress are:10.10.10.2& 10.10.10.3. With Diffrent Subnet mask as 255.255.0.0 and 255.255.255.0.How should a configure a router or default gateway...
- Tags: Routers & switches, Network technology, NETWORKING, shirisha_gudimalla@..., router, server
- Discussion threads 2007-07-30
- << Previous
- page 1 of 1
- Next >>
