cisco 2610

TechRepublic Resources

• sort by:
• Relevance
• Date
• Popularity

Can I use a Cisco PIX501 and 2610 for multiple DMZ's (No PIX515)

Hi, I have a question about how I should setup/configure the following scenerio. I have a small office with a cable connection using a single public IP address. This would be easy if I had a Cisco PIX 515 with a few DMZ ports but at the moment that is not...

Tags: AlexMTech@..., cisco, Cisco 2610, Cisco Systems Inc., DMZ, firewall, ios fw, LAN, network, networking, PIX, pix 501, pix 515, server, VLAN, VPN

Discussion threads 2007-01-08

Additional Resources

Cisco 2610 Router not recognizing WAN module

I have a Cisco 2610 router and we purchased a Cisco NM-16ESW switch module. According to Cisco this module should run fine in this router nut when I start it up I cannot see anything. I am reasonably certain that there is something missing in the manuals or...

Tags: Routers & switches, Network technology, NETWORKING, WAN, rhinedl@..., router, adapter, Cisco Systems Inc.

Discussion threads 2007-08-01

Password recovery for Cisco 2610

Password recovery for Cisco 2610 router. I reboot did the BREAK at the prompt rommon1> conferg 0x2142but I get the message monitor: command "boot" aborted due to user interrupt rommon2> resetWhat is the cause and Fix for this problem?

Tags: Cisco 2610, Password Recovery, Cisco Systems Inc.

Discussion threads 2008-04-04

access wan through wan ip in cisco 2610

i couldn't able to ping wan ip through lan in cisco 2610 series while doing vpn. plz anybody can help me

Tags: WANs, Network technology, NETWORKING, cisco 2610, WAN, wan ip, Cisco Systems Inc., IP

Discussion threads 2008-12-28

Talking Shop: Beware of Cisco refurbished equipment

Looks at the harsh warranty restrictions Cisco is putting on refurbished or used routing equipmentCisco Systems was the darling of the IT industry and the stock market in the 1990s, as it enjoyed phenomenal growth (50 percent or more, year after year) throughout the decade. During this period, Cisco was,...

Tags: David Davis CCIE, MCSE+I, SCSA, Cisco Systems Inc.

Technical articles 2002-03-28

Cisco 2610 IOS

Can anyone identify Cisco IOS versions for a 2610 router that support full duplex on the ethernet interface?Well...Is it the 2610, or the 2610XM?How much RAM or flash do you have in it? These will factor into which IOS you can get.You can get c2600-i-mz.123-26.bin, but you need 32MB DRAM...

Tags: Memory, Network technology, NETWORKING, Cisco Systems Inc.

Discussion threads 2008-07-09

Choose a Cisco router that best fits your organization's needs

How can you find the right Cisco router for your organization? When it comes to choosing a Cisco device, you have several options to help you make the decision. David Davis walks you through some of these options and introduces you to the Cisco Product Advisor, a time-saving tool that...

Tags: Cisco Router, Cisco Systems Inc., Routers & switches, Network technology, NETWORKING, David Davis CCIE, MCSE+I, SCSA, router, Cisco Routers and Management Newsletter, Cisco Product Advisor

Technical articles 2005-06-09

Automate security configurations with Cisco IOS 12.3

The new Cisco Internetwork Operating System IOS version 12.3 contains a very useful feature that allows administrators to automate a number of security functions.Of course, people love anything automatic. We have automatic transmissions in many of our cars, we can set automatic replies to e-mail messages when we are out...

Tags: Cisco IOS, Cisco Systems Inc., David Davis CCIE, MCSE+I, SCSA, router, security

Technical articles 2003-10-27

Using a Cisco IOS ruter as a VPN server

As Cisco routers have about 85% of the router market, mostbusinesses today have a Cisco router connecting them to the Internet. So, whynot use that router for more than just routing? What if it could be a VPNserver to connect roaming users with laptops or home PC's back into yourbusiness...

Tags: Cisco Systems Inc., router, VPN, David Davis CCIE, MCSE+I, SCSA, Cisco IOS, Cisco Router, server

Technical articles 2005-11-11

Cisco Router & Switch Setup Help

I am a networking student who is trying to set up a home cisco router/switch setup. I currently have a Cisco 2610 with two ethernets and a cisco 2924 switch. Currently so far the only think i have hooked up is one ethernet card to the switch on port1. I...

Tags: Network technology, NETWORKING, Cisco Router, router, IP, Cisco Systems Inc., password

Discussion threads 2008-01-23

Cisco Router/Switch/WAP/ISP help

I am a networking student who is trying to set up a home cisco router/switch setup. I currently have a Cisco 2610 with two ethernets and a cisco 2924 switch. Currently so far the only think i have hooked up is one ethernet card to the switch on port1. I...

Tags: Network technology, NETWORKING, IP, Cisco Systems Inc., password

Discussion threads 2008-01-23

cisco prob

Dear all, i have a prob in my dialup RAS router (cisco 2610), when i am trying to gain access via my 1721 router, it is giving me this error: "Ignoring Spoofed Challenge" ,noting that i tried access from the same router with the same configuration but from another building...

Tags: Routers & switches, Network technology, router

Q&A 2006-06-19

Using 3 Cisco 2600 Routers to build.....

I'm using 3 Cisco 2600 routers (2 - 2621, 1 - 2611) to build a lab. I plan on maxing out the RAM but have a question on the serial interfaces. I'm thinking about buying either a 1T DB60 Serial WIC for each router or a 2T Smart Serial WIC....

Tags: Cisco Systems Inc., Ethernet, Fast Ethernet, lsmith1989, networking, router

Q&A 2005-05-29

Use the free Cisco Security Device Manager to work with routers

If you think the Cisco IOS command line is difficult to use, and you would just like to be able to point and click to monitor and configure your Cisco routers, then Cisco's new Security Device Manager SDM may be just what you're looking for. Plus, if you already have...

Tags: security device, Security Device Manager, David Davis CCIE, MCSE+I, SCSA, Cisco Systems Inc., Cisco Security Device Manager, router, security

Technical articles 2004-04-16

Problem imaging a Ciso 2600 Series router

Hey guys, Hoping go get a touch of help here.I got 2 cisco 2610's from my job for 5 bucks apiece. I'm planning on using them and a few other pieces of hardware to make a practice network lab for my ccnp/ccie training.I imaged my 1st router without a problem,...

Tags: Routers & switches, Network technology, NETWORKING, UAnimosity, router, image, imaging

Discussion threads 2007-05-05

Five things you should know about configuring a Cisco IOS switch

RouterI have just set up my PC's (35) and I thought I would use dial-up networking but my service provider installed the Router and now would like to know how to configure the whole thing from the service provider telephone line to my switch/hubRE: Five things you should know about...

Tags: LANs, Routers & switches, Network technology, NETWORKING, fastEthernet, Cisco Systems Inc., Cisco IOS, c2600, sub-interface, VLAN

Discussion threads 2008-01-25

Effectively filter Cisco router command output

was this new info for anyone?I actually learned a few things while writing this article. Did it contain helpful info for anyone else out there?Thanks for reading TechRepublic!David DavisExport to .txt file another optionYes, most of the information presented here was new to me. While I usually prefer to capture...

Tags: Cisco IOS, cisco ios filter, Cisco Router, Cisco Systems Inc., ddavis@..., networking, new-to-me, router, Show Running-Config

Discussion threads 2005-08-26

Enter commands more efficiently with Cisco command aliases

vlarseuzvery wellAlias command....Well, it doesn't work on my 2610 routers. What series or IOS version does it work on?Alias was introduced in IOS version 10.3Hello & Thanks for your post.According to the Cisco documentation, the Cisco alias command was released in IOS version 10.3. Here is a link to...

Tags: IOS Version, Cisco IOS

Discussion threads 2005-09-09

Labs for 2610, 2514 and 2950

I'm just getting started in CCNA class and was given some old equipment ... a 2950, a 2610 (one serial/1 ethernet), and 2 2514s with a MTU for each.I can do basic set up on these individually but please suggest some layouts and exercises I might be able to accomplish...

Tags: Ethernet, Broadband Internet, Network technology

Discussion threads 2008-08-14

Router setup - can't see it

Hello - bought an old Cisco 2610 router, to mess with at home; ethernet and aux ports seem to work light up when I plug in the crossover cable to connect to my Mac, but the console port doesn't seem to connect properly (the RJ-45 doesn't snap in, and no...

Tags: Network technology, Routers & switches, Cable, NETWORKING, router, Console Port

Discussion threads 2009-01-21